Display of Advanced CVD modification
-
- Posts: 3
- Joined: Thu Jul 11, 2019 4:55 pm
- Been thanked: 2 times
Display of Advanced CVD modification
Hello, I find the advanced CVD very useful to look at stops vs resting liquidity. I would like to request two enhancements
1) Can you modify the display of the advanced CVD to be more like a "pulse" graph, where the line would be 0 until stops are detected, above "x" qty, and then it would pulse up or down. Similar to a heart rate monitor.
Right now the display is cumulative, and as the day goes on, the scale increases to the point it's impossible to notice spikes of 100.
I attached a image that I mocked up using a red line. The white line is the current A.CVD that you have implemented.
2) Can you make a audible alert that we can set if the A.CVD > X quantity? So I'd like it to actively notify me if the CVD reads a pulse of > 250 as a example.
Thanks!
1) Can you modify the display of the advanced CVD to be more like a "pulse" graph, where the line would be 0 until stops are detected, above "x" qty, and then it would pulse up or down. Similar to a heart rate monitor.
Right now the display is cumulative, and as the day goes on, the scale increases to the point it's impossible to notice spikes of 100.
I attached a image that I mocked up using a red line. The white line is the current A.CVD that you have implemented.
2) Can you make a audible alert that we can set if the A.CVD > X quantity? So I'd like it to actively notify me if the CVD reads a pulse of > 250 as a example.
Thanks!
- Attachments
-
- example_pulse.jpg (14.43 KiB) Viewed 8703 times
-
- 2019-07-11_10-06-44.png (169.15 KiB) Viewed 8703 times
-
- Posts: 6
- Joined: Fri Jul 12, 2019 2:33 pm
- Has thanked: 1 time
Re: Display of Advanced CVD modification
+100 , this would be a lot more useful IMHO. Currently I have to keep turning it "on" or "off" to reset it after it grows too much. Also while we're at it... having an audio alarm when it hits a threshold would be really nice so we're not glued to the screen.
Re: Display of Advanced CVD modification
Brilliant idea! That would be awesome if we could get that going rather than having a manual reset.
Re: Display of Advanced CVD modification
Second that. Would be fantastic to have that feature reset to a 0 point.
-
- Posts: 3
- Joined: Thu Jul 11, 2019 4:55 pm
- Been thanked: 2 times
-
- Posts: 548
- Joined: Mon Jul 09, 2018 11:18 am
- Has thanked: 25 times
- Been thanked: 85 times